Find Programmable DC Power Supply, 15v DC Programmable Power Supply, 1200w DC Power Supply on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)
Home > Products > Other LED Tube > 0-20V Programmable switching AC DC power supply

0-20V Programmable switching AC DC power supply

  • 0-20V Programmable switching AC DC power supply
  • 0-20V Programmable switching AC DC power supply
  • 0-20V Programmable switching AC DC power supply

0-20V Programmable switching AC DC power supply

Basic Info

Model No.: 20VDC series(1U Type)

Product Description

Product Introduction:

APM 20VDC series 1U format single output 15v DC Programmable Power Supply features wide-adjust output voltages from 0V-20V and current capabilities up to 60A, offers output power range from 0-600W to 0-1200W. These rack and benchtop models notably provide high power density, low ripple and a user-friendly front panel.The rms ripple is as low as 6mV. It also covers 1200w DC Power Supply with wide-adjust output voltages.They are suitable for use in a broad range of ATE, OEM and laboratory applications such as component testing, semiconductor burn-in, test and measurement, RF Amplifiers, LED/laser testing.


Areas of Application:

● Automobile Sector: Used for automobile electronics product testing,and simulation of the voltage waveform of automobile under different conditions.
● LED Sector: Used for LED driver and LED product testing and burn-in test.
● Automatic Testing Sector: Can be integrated in automatic testing system to test electricity parameters, and to supply power to the products under testing.
● Medical Field:Used for medical device testing or it being integrated in medical equipment.
● Communication Sector: Used for the tests of communication power supply and electronic devices.
● Household Field:Used for household products test.
● Scientific Research Sector:Used in scientific research units, colleges & universities,and certification institutions for laboratory testing and power supply.
● Aerospace Sector: Used for aviation electronic products testing and power supply.


Product Features:

● With accurate voltage and current measurement capability.
● Coded knobs, multifunctional keyboard.
● Standrad RS232/LAN/RS485/USB interface.
● Remote sensing to compensate for voltage drop in load leads.
● DVM independent measurement functions.
● Function of editing List waveform.
● Use SCPI commands.

● CE certified.


Product Advantages:
(1)High efficiency
APM programmable 20VDC source has an operating efficiency of up to 85%. In the circuit design, switch tube is using zero (0) voltage conductor and when the circuit is running, the damage inflicted on the device itself is reduced, and subsequently increase the overall efficiency while lowering the rate of temperature rise of the DC source. Compare with Other similar types of product in markets, APM Technologies' programmable DC source has an obvious advantage.

(2)Ultrafast Respond Time

The unique fast drop function makes the response of APM programmable DC source much better than that of any other similar products available on the market.

Model SP20VDC600W SP20VDC1000W SP20VDC1200W

response(voltage rise time)

≤10ms

response(voltage drop time)

≤150ms(No load)

≤150ms(No load)

≤150ms(No load)

≤20ms(Full load) ≤15ms(Full load) ≤12ms(Full load)

(3)DVM measurement function

APM programmable DC source's built-in DVM independent measurement function can measure the value of output voltage at the output terminal, and display the value at VFD screen by switchover the front-panel buttons. The DC source can also be used as external equipment in laboratory testing to measure the voltage values.

(4)Master/Slave Control

In the master-slave control mode, up to 10 units of APM programmable DC source can be used in a series or parallel mode.
Master-slave control mode can realize the effect as "a hundred responses to a (single) call". Once the master-slave mode is settled, "SLAVE" will be locked in the main interface and exclusively controlled by "MASTER". When there is a "SLAVE" signaling of protection mode, all the DC sources will turn off and exit master-slave mode.

(5)Series Mode Functions

APM programmable 20 VDC source via its RS485 interface can be operated by using up to 31 units of the device ,thus makes it possible to simultaneously control all the DC sources connected on RS485 from PC.


Technical Specification:


Model
SP20VDC600W
SP20VDC1000W
SP20VDC1200W
1 Input Voltage Range
90-265VAC
2 Input Frequency Range
47-63HZ
3 Power Factor
>0.98
4 Input Power
750VA(MAX)
1300VA(MAX)
1500VA(MAX)
5 Output Voltage Range
0-20V
6 Output Current Range
0-60A
7 Voltage Load Regulation
10mV
8 Current Load Regulation
60mA
9 Voltage Setting Accuracy
0.05%+15mV
10 Current Setting Accuracy
0.1%+60mA
11 Voltage Measurement Accuracy
0.05%+15mV
12 Current Measurement Accuracy
0.1%+60mA
13 Voltage Ripple[1]
40mVp-p/6mVrms
14 Current Ripple[1]
60mA (Full Range)
20mA (TYP value)
15 Voltage Temperature Coefficient[2]
100ppm/℃
16 Current Temperature Coefficient[2]
150ppm/℃
17 DVM Resolution
0.1mV
18 DVM Accuracy
0.05%+15mV
19 Remote Compensation
4V MAX
20 Load Transient Response Time
≤2ms
21 Command Response Time
50ms
22 Efficiency(Full Load)
85%
85%
84%
23 Protection Function
OVP/OCP/OTP/OPP/SCP/Fold back function
24 Weight
9.5kg
25 Communication Modes
RS232/RS485/USB/LAN
26 Operating Environment
Temperature 0~40℃,Relative Humidity 10%~90%(no condensation)

[1] Test Condition: Voltage ripple, CV (Constant Voltage) mode-rated output voltage (Vp-p 20MHZ, Vrms 1.25MHZ); Current ripple: CC (Constant Current) mode (Arms 1.25MHZ)
Current ripple typical value parameter standard, test under condition that nominal voltage of the model is fully loaded, at the same time, when the full range output voltage of the model is full load output, the effective value of the current ripple is among the gamut reference range.
[2] Test Condition: Ambient temperature is among 0~40℃


 APM Technologies (Dongguan) Co., Ltd. is a high-tech enterprise specialized in the research & development (R&D), production and distribution of marine smart system (MSS), PV solar inverter, programmable power supply, automated testing system and automated manufacturing equipment. Our company has complete systems in product planning, research & development, laboratory experiment, testing, and quality control. In addition, we have passed the ISO 9001 standard certifications. APM Technologies' R&D team consists of more than 100 personnel encompassing Ph.D. and master degree holders as well as senior experts in the related industries. By collaborating with a number of domestic and international research teams and maintaining a long term strategic cooperation with leading colleges and universities, our company can ensure products and services are leading the industry. Through applying our professional techniques and technologies to continually innovate and break through, so far APM Technologies has applied for a number of invention patents and already obtained a number of utility patents, design patents, software copyrights and Other related patents. Our products have passed the CE, VDE, SAA, CQC, CSA, FCC, etc. certifications. APM Technologies from the beginning to the present, and from the past to the future, has always uphold the company spirit of "Constant Pursuit of Excellence" so as to provide our customers with the " 24 Hours a Day of Continuing Services ".

Company Info

  • Company Name: APM Technologies (Dongguan) Co., Ltd
  • Representative: liaozhengmin
  • Product/Service: Programmable Power Supplies , DC Power Supplies , AC Power Supplies , DC Source System , Three Phase AC Source System , Lab Power Supply
  • Capital (Million US $): 106,000,000RMB
  • Year Established: 2012
  • Total Annual Sales Volume (Million US $): Above US$100 Million
  • Export Percentage: 61% - 70%
  • Total Annual Purchase Volume (Million US $): Above US$100 Million
  • No. of Production Lines: 10
  • No. of R&D Staff: Above 100 People
  • No. of QC Staff: 21 -30 People
  • OEM Services Provided: yes
  • Factory Size (Sq.meters): 3,000-5,000 square meters
  • Factory Location: #23, Shuibian Industrial District, Hengli Town, Dongguan City, Guangdong Province, China
  • Contact Person: Ms. Emily Cui
  • Tel: 86-769-22028588-2892
Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters